Mold Loft

Outfitting Pier (Length of factory coastline: 800m)

Outfitting Pier (Length of outfitting pier: 300m)

Twin longitudinal slipway bert (5000DWT twin longitudinal slipway bert, total length 164.5m, minimum draft 2.882m, tidal range 6.49m)

Workshop (A total of 11 workshops and 3 warehouse)

Workshop (A total of 11 workshops and 3 warehouse)

Workshop (A total of 11 workshops and 3 warehouse)

Workshop (A total of 11 workshops and 3 warehouse)

Workshop (A total of 11 workshops and 3 warehouse)

Workshop (A total of 11 workshops and 3 warehouse)

Workshop (A total of 11 workshops and 3 warehouse)

Workshop (A total of 11 workshops and 3 warehouse)

Client office

Steel material storage field

Warehouse

Warehouse

Numerical Control Cutting Machine (Capacity: 380V,50hz,
Working widths: 4300mm
Accuracy: ±0.5mm)

Numerical Control Cutting Machine (Capacity: 380V,50hz,
Working widths: 4300mm
Accuracy: ±0.5mm)

Pier 40ton gate type jack-up crane

Gauge dock crane (15ton SWL–22.5m)

30ton range gate type crane / 120t×45m gate type crane / 40t×19.5m gate type crane

Lathe (Power: 380V,50hz
Maximum part rotation diameter: 1000mm
Maximum part length: 8000mm)

Lathe (Power: 380V,50hz
Maximum part rotation diameter: 1000mm
Maximum part length: 8000mm)

SHIPYARD INTRODUCTION

South China Shipyard (SCS-JM) is located in Xinhui District, Jiangmen City, Guangdong Province, China. The shipyard has had 70 years history in shipbuilding. The shipyard and the Ship Design and Research Institute are propelled by a proactive group of management personnel, senior engineers, designers and qualified workers. Their experience and knowledge are the foundation of excellent design and production of top-quality products.
 
Through our state-of-the-art equipment and facilities, our Ship Design and Research Institute can tailor existing designs to match customers’ requirements in a short amount of time. The shipyard is also greatly dedicated to sustainable methods of construction to protect the environment to the largest extent.
 
The shipyard prides itself in its team spirit, environmental consciousness and continuous motivation to learn. We aim to uphold these qualities in our work to design and build effective vessels that can assist marine workers in fulfilling their wishes.
 

SHIPYARD FACILITIES AND EQUIPMENT

SCS-JM is located in Xinhui District, Jiangmen City, Guangdong Province, China that is approximately 80 nautical miles away from Hong Kong.

  Name Specification
1. The shipyard covered area ~180,000m2
2. Length of factory coastline 800m
3. Length of outfitting pier 300m
4. 17,000DWT class dry dock 120m x 22m
5. Twin longitudinal slipway berth 5000DWT
 

SHIPYARD FACILITIES

  Name Specification
1. Large hull assembly workshop 1 block
2. Small hull building workshop 2 blocks
3. Digital cutting workshop 1 block
4. Carpenter workshop 1 block
5. Steel pre-treatment workshop 1 block
6. Block structure assembly workshop 1 block
7. Outfitting workshop 1 block
8. Machine processing workshop 1 block
9. Pipe processing workshop 1 block
10. Electrical workshop 1 block
11. Paint workshop 1 block
12. Power station 1 block
13. The dock station 1 block
14. Steel material storage field 2 blocks
15. Marine equipment warehouse 6 blocks
 

CRANE FACILITIES

 
Name
Specification
1.
3T-5T class workshop single beam crane
18 units
2.
15ton SWL–22.5m gauge dock crane
1 unit
3.
30ton SWL–10m gauge gate type crane 
1 unit
4.
30ton SWL–22.5m gauge workshop overhead crane
2 units
5.
30ton SWL–28m range gate type crane
1 unit
6.
Pier 40ton gate type jack-up crane
1 unit
7.
40t×19.5m gate type crane
1 unit
8.
120t×45m gate type crane
1 unit